Skip to product information
1 of 5

Cast - Commerical Wall Film

Regular price $195.00
Unit Price | Excluding GST
or 4 interest-free payments with
One Display
One Display
One Display

Wall Graphic Installation Guide

1. Wall Preparation
  • Clean the Surface: Use a damp rag to remove dust and dirt. For standard versions, some installers recommend a 70% isopropyl alcohol/30% water mix, but avoid chemicals.
  • Check Paint Cure Time: If the wall was recently painted, wait at least 30 days before applying to ensure the paint has completely "out-gassed".
2. Application Steps
  1. Peel the Top: Pull down approximately 10–15 cm of the backing paper from the top and crease it back.
  2. Align: Position the exposed adhesive at your desired starting point on the wall.
  3. Smooth Down: Gradually pull the backing downward in small increments while smoothing the fabric onto the wall.
  4. Squeegee: Use the supplied squeegee to press from the middle outward to the edges.
  5. Fix Bubbles: If a bubble appears, simply peel back that section and re-apply it.
3. Pro Tips
  • Two-Person Job: For large wall graphics, have one person pull the backing while the other smooths the image.
  • Overlapping: Wall Graphics come in multiple tile/panenels with a 2cm overlap for a seamless look.
  • Keep it Clean: Avoid touching the adhesive too much; dirt and skin oils can reduce its stickiness over time.

Ordering Process and Timing

Print Production Information

Packaging, Pickups and Delivery